September 2012
L010194
21
Current Program Filename
With the program tab sheet selected the user can obtain the current program filename, located in
the lower left corner of the SMC50WIN window. All programs created by the SMC50WIN software
will have a .mdb extension.
SMC50 Memory Available
With the program tab sheet selected the user can obtain the amount of available memory, located
in the lower right corner of the SMC50WIN window. The controller has a maximum available
memory of 2047 bytes - each instruction can use from 1 to 5 bytes.
Currently Selected Line
The currently selected line is indicated in the program by the right pointing arrow/triangle in the
left column.
Clicking on any line will select a new currently selected line.
Add/Change/Insert Commands
Add command contains 2 different tab sheets, which are Motion Parameters and Program Pa-
rameters.
Motion Parameters
Software section that allows user to enter speeds, positions, direction, etc.
Program Parameters
Software section that allows user to manipulate looping routines, I/O, delays, etc.
July 2018