P·42
7.8.8.4. Pairing the CJSM-BT
Enter the “CJSM2 Setup” menu, and select “Bluetooth”. The pre-programmed device names
appear. Logo Silver has pre-programmed the following devices:
• iPad
• iPhonePC
• Android device: Press and hold for 1 second the screen button at the top left (danger
key) to enter the settings menu.
To start the pairing process, turn on the device by pushing the joystick towards the right. After
turning on the device, turn on the controller. Select the item that you wish to pair by scrolling
down the menu, and select the device by pushing the joystick to the right.
7.8.8.5. Discovery mode
• Push the joystick forward for 10 seconds until it rings, then pull it back until it rings.
A blinking Bluetooth icon appears on the CJSM2 display. This means that the CJSM2 is
detectable.
• Select the device (e.g. Tom’s iPad) to connect and find the bluetooth devices; this will
initiate the connection to R-net. Once the connection is achieved, “Tom’s iPad” will
appear in the Connected Devices window and the iPad navigation will be possible using
R-net’s CJSM2-BT.
• To connect to an additional device (e.g. Tom’s PC), select the device and repeat the
above process. A maximum of four devices can be connected.
Selecting different connected devices:
Once the devices are paired, they will remain connected to R-net. When entering “My devices”
mode, the last connected device will always be selected in the menu. To select another device,
scroll to the desired device and push the joystick left or right. After a few seconds, a Fixed
Bluetooth icon will appear on the CJSM2 screen, and navigation from the new device can start.
Summary of Contents for LOGO SILVER OutoHAIR
Page 1: ...HIGH PERFORMANCE 4X4 POWER WHEELCHAIR Find this notice at www logo silver fr...
Page 2: ...P 2...
Page 67: ......
