P·31
Fig. 11
7.7. POWERING ON AND OFF
7.7.1. ELECTRICAL SYSTEM PROTECTION
The chair’s electronic motor control system is equipped with a current controller which
prevents damage to circuits in the event of an overload. When the motors are subjected
to significant stresses for a prolonged period, the power supplied by the device is gradually
reduced to avoid overheating. This decrease in power can go as far as the chair coming to
a complete stop. This phenomenon occurs more quickly when the outside temperature is
high. Several minutes o shutdown may then be necessary in order to regain maximum power.
When the training is blocked by an insurmountable obstacle and the user insists, causing the
engines to remain stalled for more than 10 seconds, then the electronic system automatically
cuts off the power.
7.7.2. FUSE
In addition to the protection described in the previous paragraph, the entire wheelchair
electrical system is protected against an overload by a fuse found behind the seat.
To replace a fuse damaged by a short circuit, please contact your dealer.
7.7.3. POWERING ON
• Turn on the joystick
• The engine brakes must be engaged in order to move the wheelchair forward via the
joystick.
DANGER !
Danger of death from faulty engine brake operation. When using
the OUTCHAIR, the engine brakes must be engaged and in working
order.
Summary of Contents for LOGO SILVER OutoHAIR
Page 1: ...HIGH PERFORMANCE 4X4 POWER WHEELCHAIR Find this notice at www logo silver fr...
Page 2: ...P 2...
Page 67: ......
