Appendix A: AMX Lighting Curves
51
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
0-10VDC Curve (3)
FIG. 47 shows the output voltage of a dimmer. It has a smooth taper and a cut off point of 25 volts. This
curve will shrink incandescent dimming range 25%.
Relay turn on level = 1%
Dimming Range = 30 - 115 VAC.
FIG. 50 shows the output voltage of the RDM-HDC module. The voltage range is from 2.6 to 9.3 VDC
when attached to test ballast. This curve is primarily used with Advance Mark VII ballast using the
RDM-HDC module.
FIG. 47
Curve 3 voltage output in volts RMS
FIG. 48
Curve 3 at 120 VAC
FIG. 49
Curve 3 at 240 VAC
Summary of Contents for Radia RE-DM6
