AMX PRO-DP16 DECOR PROLINK FLUSH MOUNT KEYPAD PANEL, Instruction Manual, Page: 21 / 30

DIP Switch Configuration
17
PRO-DP16 Decor 16-Button PROlink Wall Panel
!
If DIP switch 6 is Off, and offset is set to zero (DIP switches 1-3 Off), recall Preset is 12.
Use FIG. 10 to determine the recall Presets associated with various Presets when DIP
switch 6 is Off.
Using Switch 7 to Enable Either Preset Recall mode, or
Up/Down Ramping
Panel pushbuttons 14 and 15 (up and down buttons) have two possible functions, depending on the
setting of DIP switch 7. DIP switch 7 enables/disables the panel’s ability to ramp channel levels and
recall presets.
!
Set switch 7 to Off (factory default setting) to enable Preset Recall mode, and allow
ramping of light levels. In this mode, pushbuttons 14 and 15 function as Up and Down
buttons for ramping a selected preset.
!
Set switch 7 to On to disable preset ramping. In this mode, pushbuttons 14 and 15 recall
Presets instead of ramping presets.
Using Switch 8 to Enable/Disable Program Mode
DIP switch 8 determines if the panel has the ability to enter Program mode, which allows you to
program lighting scenes, and store them as programmed Presets.
!
Set switch 8 to Off (factory default setting) to enable programming of preset levels, fade
times, ramp rates, dimmer curves, and low-end settings.
When preset programming is enabled, press pushbuttons 14 and 15 simultaneously to
enter Program Mode. The PGM LED lights when this mode is active.
! Set switch 8 to On to disable the programming function. When Program mode is
disabled, panel pushbuttons 14 and 15 do not allow the panel to enter Program mode.
FIG. 10 DIP switch 6 Offsets at the Off position
1 5 9 13
2 6 10 14
3 7 11 15
4 8
12 16
5 9 13 17
6 10 14 18
7 11 15 19
8 12
16 20
9 13 17 21
10 14 18 22
11 15 19 23
12 16
20 24
13 17 21 25
14 18 22 26
15 19 23 27
16 20
24 28
17 21 25 29
18 22 26 30
19 23 27 31
20 24
28 32
33 37 41 45
34 38 42 46
35 39 43 47
36 40
44 48
49 53 57 61
50 54 58 62
51 55 59 63
52 56
60 64
65 69 73 77
66 70 74 78
67 71 75 79
68 72
76 80
+0 +4 +8
+12
+64
+48 +32 +16
Recall Preset value
associated for button
12 (Off) for the related
Preset Offset value.
Preset Offset value used
for button 12 (Off). This
value is determined by
setting DIP switches 1 - 3.