AMX PRO-DP16 DECOR PROLINK FLUSH MOUNT KEYPAD PANEL, Instruction Manual, Page: 20 / 30

DIP Switch Configuration
16
PRO-DP16 Decor 16-Button PROlink Wall Panel
Using Switches 1, 2 and 3 to Set Button Offset Values
The default setting for the DIP switch is all off. Thus, by default, there is no offset assigned to the
panel pushbuttons (1-16). Use DIP switches 1-3 to set offsets by factors of four, as shown in the
following table.
FIG. 8 is an example of how the Preset Offset can be used to change the value associated with a
Preset.
Using Switch 6 to Offset the Off Button
In multi-panel installations, you must offset the Off button (pushbutton 12), so that pressing Off on
the panel doesn’t turn off other panels on the PROlink bus.
! If DIP switch 6 is On and offset is zero, recall Preset value is 81. Use FIG. 9 to determine
the recall Presets associated with various Presets when DIP switch 6 is On.
Preset Offsets Chart (for DIP Switches 1, 2, and 3)
Preset Offset DIP switch 1 DIP switch 2 DIP switch 3 Result
0 Off Off Off Pushbuttons = 1-16 (no offset - default)
4 On Off Off Pushbuttons = 5-20
8 Off On Off Pushbuttons = 9-24
12 On On Off Pushbuttons = 13-28
16 Off Off On Pushbuttons = 17-32
32 On Off On Pushbuttons = 33-48
48 Off On On Pushbuttons = 49-64
64 On On On Pushbuttons = 65-80
FIG. 8 Sample DIP switch Preset Offset
FIG. 9 DIP switch 6 Offsets in the On position
1 5 9 13
2 6 10 14
3 7 11 15
4 8 12 16
9 13 17 21
10 14 18 22
11 15 19 23
12 16 20 24
DIP switch 2 On; 1 and 3 Off.
DIP switches 1 - 8 Off
Preset values are now offset by 8
1 5 9 13
2 6 10 14
3 7 11 15
4 8
81 16
5 9 13 17
6 10 14 18
7 11 15 19
8 12
82 20
9 13 17 21
10 14 18 22
11 15 19 23
12 16
83 24
13 17 21 25
14 18 22 26
15 19 23 27
16 20
84 28
17 21 25 29
18 22 26 30
19 23 27 31
20 24
85 32
33 37 41 45
34 38 42 46
35 39 43 47
36 40
86 48
49 53 57 61
50 54 58 62
51 55 59 63
52 56
87 64
65 69 73 77
66 70 74 78
67 71 75 79
68 72
88 80
+0 +4 +8
+12
+64
+48 +32 +16
Recall Preset value
associated for button
12 (Off) for the related
Preset Offset value.
Preset Offset value used
for button 12 (Off). This
value is determined by
setting DIP switches 1 - 3.