background image

Introduction

16

 MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual

Table Charging Station Connector Locations

With the unit facing you, the mini-USB port (for programming and downloading firmware as well as connecting USB headphones 

using the AMX-provided adapter cable) and the DC power port are located on the lower left side of the device (FIG. 3). The 

connector for the Table Charging Station (please refer to the 

Table Charging Station

section on page 19) is located on the bottom 

of the device. 

NOTE: 

Although firmware upgrades can be conducted over a wireless Ethernet connection, transferring firmware KIT files over a 

direct USB connection is recommended, and only when the panel is connected to a power supply. If battery power or wireless 

connection fails during a firmware upgrade, the panel flash file system may become corrupted.

In addition to its speaker, the MVP-5200i also utilizes its mini-USB port as a connector for standard headphones or headsets. These 

headphones must use a mini-USB plug or adapter in order to utilize this feature.

NOTE: 

While standard input/output headsets may be used in lieu of headphones, the headset may only be used for output. While you 

may receive sound from the headset, its microphone will not function. Always use the MVP-5200i’s microphone for receiving sound.

Basic Operation

The MVP-5200i is operated using both its integral touchscreen and the navigation wheel on the right side of the device. If the 

device has gone into its Standby Mode, a touch of the touchscreen or of the button wheel will reactivate it.
The MVP-5200i device’s power use allows up to 96 hours of use between rechargings of its internal battery, but its battery charge 

lasts up to 120 hours if the device goes into Shutdown Mode during that time. The device may be placed in its charging cradle at 

any time and operated within its cradle.
The device will automatically go into Sleep Mode after fifteen minutes of inactivity, and this limit may be changed at any time. Any 

wireless Internet connection intended for the device will be reconnected within approximately twenty seconds after the device is 

placed in its charging cradle. Depending upon preselected settings, the device may be set to go into Active Mode as soon as it is 

placed in the cradle.

Navigation Wheel

The MVP-5200i device uses a unique button wheel for all commands not directly involving the touchscreen.   This wheel, known as 

a navigation wheel, is located in the upper right corner of the device (FIG. 4). Used with the touchscreen, the navigation wheel 

allows scrolling and adjusting by turning the wheel with a thumb or finger and then pressing down on one of the wheel’s compass 

points for up, down, left, and right. The wheel is sensitive enough to adjust levels with one-third of a rotation. The center of the 

navigation wheel also acts as a button in its own right: for example, pressing down directly upon the wheel center may be used for 

the equivalent of an "Enter" keystroke

Press and hold the wheel center for three seconds to access the 

Setup

 pages (for more information, please see the 

Setup 

Pages

section on page 44). Continue to hold the wheel center for another three seconds to access the 

Calibration

 page (page 65).

If the MVP-5200i needs to be shut down or reset for any reason, press and hold down the wheel center button until the popup 

stating “panel shutting down” appears or the screen goes dark. Continuously holding down the center button down will cycle the 

MVP-5200i through the following steps:
1.

Setup Pages

2.

Calibration

3.

Firmware shutdown

4.

Hardware shutdown (automatically invoked if the device’s firmware is unable to shut down the device.

NOTE: 

Shut down the panel by holding the wheel center button only if the Setup pages are otherwise inaccessible. Regularly shutting 

down the device by this method can corrupt the Flash memory.

When in its Standby Power Mode, the MVP-5200i may only be returned to its Awake state by touching the screen.
The light at the center of the navigation wheel brightens and dims based on its source of power. It lights at full intensity when 

attached to a power source, such as the Table Charging Station (see the 

Table Charging Station

section on page 19) or the Wall 

Charging Station (see the 

Wall Charging Station

section on page 20), but lights at only half intensity when running on its internal 

FIG. 3  

MVP-5200i side view with programming port

FIG. 4  

Navigation wheel detail

Front

Mini-USB port

Table Charging

Station Connector

DC power port

Wheel center

Compass points

The navigation wheel may be turned 

clockwise or counterclockwise

Summary of Contents for MVP-5200i-GB















































































































































Reviews: