![background image](http://html.mh-extra.com/html/amx/multi-disc-loader-system-max-mdl200/multi-disc-loader-system-max-mdl200_instruction-manual_2937566013.webp)
Using BulkRipper and the MDL200
9
MAX-MDL200 Multi-Disc Loader System
Using BulkRipper and the MDL200
Overview
Once the MDL200 is communicating with both the laptop PC and the target MMS server (see
previous section), it is ready to be used for transferring media to the server. The main steps in the
process are:
1.
Loading Discs Into the MDL200
: physically loading the discs into the MDL200 carousel.
2.
Transferring the Disc Images
: Loading the contents of the discs to the target MMS server.
Depending on the settings specified (in the Settings dialog), you may need to manually identify
any discs that were not automatically identified. See the
Loading Media to the Target MMS
Server
section on page 11 for details.
3.
Unloading the Discs:
Physically removing the discs from the MDL200. Refer to the
Removing
Discs From The MDL200
section on page 16 for details.
Each of these steps are described in the following sub-sections.
Loading Discs Into the MDL200
Discs are physically loaded into the MDL200 through the vertical slot on the front panel of the unit
(see FIG. 9), using the
Changer > Load Range
and
Load All
options in BulkRipper.
1.
First verify that the MDL200 is powered up (the power switch is located on the lower-left of
the front panel), and communicating with the laptop PC and the target MMS Server (refer to
the
Verifying Communication Between the PC, MDL200 and MMS Server
section on page 12
for details).
2.
Select
Changer > Load Range
or
Load All
from the BulkRipper menu bar.
If BulkRipper is not already running on the laptop PC, launch the software before
beginning.
FIG. 9
Loading Discs Into the MDL200
Disc slot
(load discs here)
(front)
Label side faces
to the right
Front panel controls not used
(use the transport controls provided in BulkRipper instead)