![background image](http://html.mh-extra.com/html/amx/multi-disc-loader-system-max-mdl200/multi-disc-loader-system-max-mdl200_instruction-manual_2937566030.webp)
AMX BulkRipper - Program Reference
26
MAX-MDL200 Multi-Disc Loader System
Status Bar
The Status Bar (FIG. 19) indicates current connection status between the laptop PC running the
BulkRipper application and both the MDL200 and the target MMS server.
The status bar (at the bottom of the dialog) should indicate that you have successfully connected to
the MDL200 and the MMS server:
The center area of the status bar should indicate that the MDL200 is connected and
running ("Ready"), and the MMS icon on the right side of the status bar should be green
to indicate communication with the server.
If you are not communicating with either the MDL200 or the MMS server, first verify
that your cables are connected properly. Then select
File > Settings
(in BulkRipper) to
open the Setup dialog (FIG. 11 on page 11) to verify that the IP address indicated here
matches that of the target MMS server.
FIG. 19
Status Bar