Using BulkRipper and the MDL200
15
MAX-MDL200 Multi-Disc Loader System
Manually Entering Disc Information
If no suitable title matches are found, then you may enter the information manually via the New
Title Entry dialog (FIG. 14):
1.
Click
New Entry
in the Multiple Matches dialog to open the New Title Entry dialog. This
dialog contains a text field where you can manually enter a title for this disc. For DVDs, you
can also associate a
Genre
,
Aspect Ratio
and
Sound
option to the disc.
If necessary. you can use the
Eject
and
Load
buttons in the New Title Entry dialog to eject the
disc so that you can review any information that is printed on the disc label:
a.
Press
Eject
to eject the disc (at which point you have approximately 10 seconds to
physically remove the disc from the disc loading slot on the MDL200).
b.
When you’re finished, press the
Load
button and replace the disc (label-side facing to the
right) in the carousel (you have 10 seconds after pressing the Load button to insert the
disc).
2.
Click inside the
Title
text field, and type the title that you want to associate with this disc.
3.
For DVDs, use the drop-down menus to select a
Genre
,
Aspect Ratio
and
Sound
option, and
click
OK
to accept the new disc information.
Identifying Discs - Without Transferring Media
The MDL200 can be used to identify loaded discs without performing the transfer function. To
identify the discs loaded in the MDL200:
1.
Specify a range of discs to be identified, using the
First Disc
and
Last Disc
fields (on the
BulkRipper main screen) for each drive.
2.
Click the
Identify
button.
BulkRipper uses color coding to indicate whether each disc has been successfully identified
(see the
Disc/Slot Window
section on page 24 for details).
FIG. 14
New Title Entry dialog (for DVDs)
Type disc title here
Disc slot number (1-200) and
media type (CD or DVD)
Ejects this disc from the MDL200
Press to load a disc into this slot number