AMX Modero G4 Instruction Manual Download

Page: 68 / 140

Programming

Modero G4 Touch Panels - Configuration and Programming

Page Commands (Cont.)

@PPN

Activate a specific popup page to launch on either a specified page or the current page.

If the page name

is empty, the current page is used (see example 2).

If the popup page is already on, do not re-draw it. This

command works in the same way as the ’Show Popup’ command in TPDesign4.

Syntax:

"'@PPN-<popup page name>;<page name>'"

Variables:

popup page name = 1 - 50 ASCII characters. Name of the popup page.

page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

Examples:

SEND_COMMAND Panel,"'@PPN-Popup1;Main'"

Activates ’Popup1’ on the ’Main’ page.

SEND_COMMAND Panel,"'@PPN-Popup1'"

Activates the popup page ’Popup1’ on the current page.

@PPT

Set a specific popup page to timeout within a specified time. If timeout is empty, popup page will clear the
timeout.

Syntax:

"'@PPT-<popup page name>;<timeout>'"

Variables:

popup page name = 1 - 50 ASCII characters. Name of the popup page.

timeout = Timeout duration in 1/10ths of a second.

Example:

SEND_COMMAND Panel,"'@PPT-Popup1;30'"

Sets the popup page ’Popup1’ to timeout within 3 seconds.

@PPX

Close all popups on all pages. This command works in the same way as the 'Clear All' command in
TPDesign4.

Syntax:

"'@PPX'"

Example:

SEND_COMMAND Panel,"'@PPX'"

Close all popups on all pages.

@PSE

Set the show effect for the specified popup page to the named show effect.

Syntax:

"'@PSE-<popup page name>;<show effect name>'"

Variables:

popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

show effect name = Refers to the popup effect name being used.

Example:

SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'"

Sets the Popup1 show effect name to ’Slide from Left’.

@PSP

Set the show effect position. Only 1 coordinate is ever needed for an effect; however, the command will
specify both. This command sets the location at which the effect will begin.

Syntax:

"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

Example:

SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"

Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.

Summary of Contents for Modero G4













































































































































Search results

Summary of Contents for Modero G4

Reviews:

Related manuals for Modero G4

Brands by name

Popular brands

AMX Modero G4, Instruction Manual

Search results

Summary of Contents for Modero G4

Reviews:

Related manuals for Modero G4

Brands by name

Popular brands