AMX Modero G4 Instruction Manual Download

Page: 33 / 140

Settings Pages

Modero G4 Touch Panels - Configuration and Programming

Breakout Box

Use the

Breakout Box

page to configure the touch panel to receive signals from a MXA-MP Multi Preview or MXA-

MPL Multi Preview Live devices for video stream display.

If a Breakout Box is not connected to the panel’s network, all fields but the Breakout Box button will be empty.

For more information on operation and configuration of an MXA-MP or MXA-MPL, refer to the

MXA-MP/MPL

Operation Reference Guide

, available at www.amx.com.

Configuring the Touch Panel

From the Breakout Box page, press the

Breakout Box

button to enable the panel to receive information from the

Breakout Box.

If the device is connected, the remaining information on the

Breakout Box

page will self-populate as the panel

receives that information from the Breakout Box.

FIG. 36

Breakout Box page

Breakout Box Page

Breakout Box:

Click this button to enable the touch panel to receive information from the device.

Version:

Displays the current firmware version on the Breakout Box.

Serial Number:

Displays the serial number of the Breakout Box.

MAC Address:

Displays the MAC address of the Breakout Box.

Input Information:

Displays the video format and resolution coming from the video input port.

Stream Information:

This feature is currently disabled.

If the device is not connected to the touch panel at this time, any attempts at enabling
the device will fail, and the

Breakout Box

page will be blank other than the Breakout

Box button.
If an MXA-MP or MPL is not connected to the touch panel, the Breakout Box button
MUST be disabled to prevent network conflicts.

Summary of Contents for Modero G4













































































































































Search results

Summary of Contents for Modero G4

Reviews:

Related manuals for Modero G4

Brands by name

Popular brands

AMX Modero G4, Instruction Manual

Search results

Summary of Contents for Modero G4

Reviews:

Related manuals for Modero G4

Brands by name

Popular brands