AMX Modero G4 Instruction Manual Download

Page: 47 / 140

Settings Pages

Modero G4 Touch Panels - Configuration and Programming

Changing the SIP Proxy Address

To change the SIP proxy address:

From the

SIP

page, select the

Port Number

field to open the

SIP Proxy Address

keyboard (FIG. 60).

Enter the new proxy address and click

Click

Save

to save your changes to the

SIP

page and return to the

Configuration

page.

Changing the SIP Port Number

To change the port number used by the proxy server:

From the

SIP

page, select the

Port Number

field to open the

SIP Port Number

keypad (FIG. 61).

Enter the new port number and click

The SIP page will now display the new SIP port number in the

Port Number

field.

Click

Save

to save your changes to the

SIP

page and return to the

Configuration

page.

Changing the SIP STUN Address

To change the STUN address:

From the

SIP

page, select the

STUN Server

field to open the

SIP STUN Address

keyboard (FIG. 62).

SIP Page (Cont.)

STUN Server:

This option enables you to enter the IP address or DNS name of the Simple Traversal of UDP
through NATs (STUN) server. This field is optional.

Cancel:

Press the

Cancel

button to return to the

Configuration

page without saving any changes

made on the

SIP

page.

Save:

Touch the

Save

button to save the changes and return to the

Configuration

page.

FIG. 60

SIP Proxy Address keyboard

FIG. 61

SIP Port Number keypad

Summary of Contents for Modero G4













































































































































Search results

Summary of Contents for Modero G4

Reviews:

Related manuals for Modero G4

Brands by name

Popular brands

AMX Modero G4, Instruction Manual

Search results

Summary of Contents for Modero G4

Reviews:

Related manuals for Modero G4

Brands by name

Popular brands