Using the NetLinx Module
87
Metreau Keypads Instruction Manual
External Tuner
Touch
External Tuner
to invoke the Device Control page shown in FIG. 95.
The following table lists the option on this page.
FIG. 95
Device Control page - External Tuner
Device Control Page - External Tuner
Display Window:
Displays the current Channel, Category and Song info.
Seek Up/Down:
Press the Up and Down arrow buttons to seek up/down on the selected band.
Mono/Stereo:
Press to toggle mono/stereo (default = Stereo).
FM/AM:
Press to toggle band (FM/AM)
Keypad:
Use the keypad button for direct tuning. Press enter to tune to the specified frequency. Note that the tuner
automatically detects the band (AM/FM) based on the number entered.
Presets:
Use the Presets buttons to recall up to ten station presets.
Zone Options:
Press to access the Zone Options popup for configuring audio settings for the selected Location (Zone). Note that
the currently selected Location is indicated in the upper-right corner of the page (see the
Zone Options
section on
page 80).
Change Source:
Press to access the Sources page for this location. Note that the currently selected Source is indicated in the
upper-left corner of the page (see the
Change Source
section on page 80).
Mute:
Press to mute the audio.
Volume Up/Down: Press the Up and Down arrow buttons to adjust the volume up/down.
Power On/Off:
Press to toggle the Source device Off/On, in this Zone only. The source device will continue playback in other Zones.
Display window
Mute
Volume Up
Volume Down
Tuner Presets 1-10
Seek Up/Down
(current Station info)
Toggle Stereo/Mono
Toggle AM/FM
Source On/Off (this Zone only)
Numeric keypad for direct tuning
(press Enter to select
specified station)