Using the NetLinx Module
80
Metreau Keypads Instruction Manual
Zone Options
From a Location / Device page, press
Zone Options
to invoke the
Zone Options
popup shown in FIG. 87.
Use the Up/Down buttons to adjust
Bass
and
Treble
for this Location. The current levels are indicated in the vertical status
bars adjacent to each set of Up/Down buttons (default =
flat
).
Touch-and-drag the slider to adjust the
Balance
setting (default =
centered
).
Touch the SRS menu to select an
SRS mode
(default =
SRS Off
).
When finished, press
exit
to apply changes and close the
Zone Options
popup.
Change Source
From a Location / Device page, press
Change Source
to invoke the
Sources
page for this Location, as shown in FIG. 88.
This page allows you to change the source device to be used for the selected Location. Note that the currently selected Location is
indicated on the right side of this page.
To change sources for this Location, simply press the desired Source button. This action invokes the Device Control Page for the
selected Device type. Use the options in the Device Control page to control playback.
FIG. 87
Zone Options popup
FIG. 88
Sources Page (for the "Dining Room" Location)
Currently
selected
Location
