Using the NetLinx Module
70
Metreau Entry Communicators
Allowing a Panel To Monitor
1.
Select the
Setup
button on your intercom page.
2.
On the intercom setup page, press
Advanced Setup
. This launches the password numeric keypad.
3.
Enter the password and press
Done
. The default password is
Password 4
of the panel’s firmware
Password Setup
.
4.
Press the button beneath
Allow This Panel to Monitor
to toggle the option. The button indicates its
current state.
5.
Press
Back
to return to the intercom setup pages.
6.
Press
Exit
when you are finished.
Naming a panel
1.
Select the
Setup
button on your intercom page.
2.
On the intercom setup page, press
Advanced Setup
. This launches the password numeric keypad.
3.
Enter the password and press
Done
. The default password is
Password 4
of the panel’s firmware
Password Setup
.
4.
Press in the area under
Panel Name
. This launches a on screen keyboard.
5.
Type the name of the panel and press
Done
. This is the name that is displayed in other panels’
intercom call directory pages.
6.
Press
Back
to return to the intercom setup pages.
7.
Press
Exit
when you are finished.
Answering an incoming Intercom call
The provided intercom pages include an call answering popup window. The popup page indicates the
name of the panel calling and two options:
Answer
- Pressing this button opens the intercom session with the other panel.
Ignore
- Pressing this button denies the intercom session with the other panel.
To answer a call, press the
Answer
button in the popup window.
If the panel you are trying to monitor does not have monitoring enabled, or the panel
you are monitoring from does not have monitoring enabled, then a double-beep is
played.
For all panels except the 5200i, this is the G4 Web Control Name. Care should be
taken when changing it.
FIG. 53
Answer Call