![background image](http://html1.mh-extra.com/html/amx/met-ecom/met-ecom_operation-reference-manual_2938146070.webp)
Programming
64
Metreau Entry Communicators
6.
Select the device’s firmware file from the
Files
section (FIG. 46).
7.
Enter the
Device
value associated with the device and the
System
number associated with the
Master (
listed
in the OnLine Tree tab of the Workspace window
).
The Port field is greyed-out.
8.
Click the
Reboot Device
checkbox. This causes the Metreau Entry Communicator to reboot after
the firmware update process is complete.
9.
Click
Send
to begin the transfer. The file transfer progress is indicated on the bottom-right of the
dialog (FIG. 46). Do not pull power from device during transfer, it can take approximately 5
minutes to finalize firmware transfer. The upgrade can still be in progress when the bargraph
reaches the end, it is a good idea to wait until the process is complete.
10.
Click
Close
(
after the device reboots
) to return to the main program.
11.
Right-click the associated System number and select
Refresh System
. This causes a refresh of all
project systems, establishes a new connection to the Master, and populates the System list with
devices on your particular system.
FIG. 46
Send to NetLinx Device dialog
Selected Firmware file
Description field for selected KIT file
Device
value
and System
number
must match the values
listed in the Workspace window
Firmware download
status