AMX MAX Servers, Operation/Reference Manual, Page: 71 / 80

Rack Mounting MAX Servers
65 MAX Servers: HT Home Theater and MMS Multimedia Servers
Rack Mounting HT and MMS-900 Servers
Each MAX-HT server comes with a Rack-Mounting Kit. Each Rack-Mounting Kit supports one server
and includes all hardware required to mount HT servers in a standard 19-inch (48-cm) equipment rack.
The parts included in the Kit include:
2 Slide Rail Assemblies (each consists of a Stationary section , an I ntermediate section and a
Chassis section ; pre-assembled for shipping)
2 Extension Brackets
2 End Brackets
6 Locking Plates (4-hole) - not required
4 Adapter Bars (9-hole)
10 flat-head screws, 10 round-head screws
FIG. 56 Sliding the MMS server chassis into the rack
FIG. 57 Included Rack Kit Parts
Inner Server Rail
Outer Slide Rail
Extension Bracket
Rack (front)
Locking Release Tab
Extension Brackets (2)
CHASSIS SECTION (2)
End Brackets (2) Locking Plates (6)
Screws: 10 round head, 10 flat head, 10 locking nuts
Adapter Bars (4)
INTERMEDIATE SECTION (2)
STATIONARY SECTION (2)
Locking Tab Hole