AMX MAX Servers Operation/Reference Manual Download Page 65

Page: 65 / 80

Replacing HDDs in MAX Servers

MAX Servers: HT Home Theater and MMS Multimedia Servers

MAX Admin Menu

Use the other options in the

Authenticate HDD

menu (accessible via the Admin Menu on the MMS), to

manage all HDDs in the server, as shown in FIG. 48.

The options in the Authenticate HDD menu are described below:

Refer to the

MAX Admin Menu

section on page 27 for more information.

FIG. 52

Authenticate Menu - View HDD and Select HDD(s) to Remove dialogs

• Add:

Select to authenticate a new HDD, as described in the previous section.

• View:

Select to view all the serial numbers and keys for HDDs in the system. Note that this list only indi-
cates HDDs that have been successfully authenticated.

• Remove: Select to remove a selected HDD from the system. One or more drives can be removed at a time.

Summary of Contents for MAX Servers

















































































Search results

Summary of Contents for MAX Servers

Reviews:

Related manuals for MAX Servers

Brands by name

Popular brands

AMX MAX Servers, Operation/Reference Manual

Search results

Summary of Contents for MAX Servers

Reviews:

Related manuals for MAX Servers

Brands by name

Popular brands