AMX MAX Servers, Operation/Reference Manual, Page: 53 / 80

DVD Region Code Settings
47 MAX Servers: HT Home Theater and MMS Multimedia Servers
The number of resets still available is indicated at the top of the Change Region page (see FIG. 43).
In the event that you expect to load large numbers of DVDs with different region codes, you should
group the DVDs together by region to minimize the number of times you’ll have to change the region
code setting (keeping in mind that it can only be changed a maximum of five times).
Also, insure that the last region code setting made matches the region in which the MAX will be
installed.
Changing the DVD Region Code Setting On MAX Servers
1.
Insert a DVD with your local region coding in the MAX Server’s DVD-ROM drive.
2.
In the System Information tab, click the Server Configuration button to access the Admin Menu.
3.
Use the arrow button on your keyboard to scroll down and highlight the Change Region option.
4.
Press the Return (Enter) to open the Change Region page.
5.
Use the up/down arrow buttons on your keyboard to select the appropriate region code setting for
your region, and press the spacebar to make your selection (indicated by an "X" to the left of the
number).
The number of resets still available is indicated at the top of the Change Region page (FIG. 43).
Refer to the MAX Admin Menu section on page 27 for information on the other options available in the
Admin Menu.
FIG. 43 MAX Admin Menu - Change Region
The number of region code setting resets still available
is indicated here (Max resets = 5).
You can change the region code setting on your MAX Server’s DVD-ROM drive up to
five times, and no more. The region code setting is locked down in the DVD-ROM
drive the fifth time it is set, permanently setting to that last region code setting. At that
point there is no way to change the region code setting again.