Upgrading Firmware
26
MXD/T-700 7" Modero X Series® Touch Panels
4.
Eject or unmount the flash drive from the PC.
Transfer the Firmware File From the Flash Drive to the Touch Panel
1.
Connect the USB Flash Drive to one of the USB Type A ports on the panel.
2.
Go to the
Install Firmware
setup page (
Configuration->Admin->Install Firmware
):
a.
Press and hold the
Sleep
button for 3 seconds to open the
Settings
page.
b.
From the
Settings
page, select the
Configuration
page. This may require entering a password.
c.
From the
Configuration
page, select
Admin
.
d.
From the
Admin Configuration
page, select
Install Firmware
.
3.
In the
Firmware Installation
page, select
New
to install new firmware from external disk.
4.
The popup page displays the name of the firmware file (for example,
"
SW5968_ModeroX_v2_103_52.kit
").
5.
Select
Yes
, and follow the directions displayed on the popup.
6.
Once the panel reboots it will perform the firmware upgrade.
After the upgrade, the unit contains the newly loaded version of firmware.
Make sure this is the only .kit file in this directory - if not, the latest version will be
used.
The Micro USB port cannot be used for firmware upgrades.
FIG. 24
Settings page
Summary of Contents for FG5968-04
