Upgrading Firmware
31
MXD/T-700 7" Modero X Series® Touch Panels
5.
Select the panel’s Kit file from the
Files
section.
6.
Enter the
Device
value associated with the panel and the
System
number associated with the Master
(
listed
in the OnLine Tree tab of the Workspace window
).
The Port field is greyed-out.
7.
Click the
Reboot Device
checkbox if it is not already checked. This causes the touch panel to reboot after
the firmware update process is complete.
8.
Click
Send
to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog.
9.
After the file transfer is complete, the panel will automatically reboot.
10.
After the panel has finished rebooting, right-click the associated System number and select
Refresh
System
. This causes a refresh of all project systems, establishes a new connection to the Master, and
populates the System list with devices on your particular system.
11.
Confirm that the panel has been properly updated to the correct firmware version.
FIG. 32
Browse for Folder window
Verify you have downloaded the latest firmware file from
www.amx.com
and then
save the Kit file to your computer.
Summary of Contents for FG5968-04
