![background image](http://html1.mh-extra.com/html/amx/fg2106-01/fg2106-01_hardware-reference-manual_2937839023.webp)
Overview
16
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
Other AMX Equipment
This section lists optional AMX accessories and part numbers you may find useful for your NX controller. You
can use all listed optional accessories with each model of NX controller.
PSN6.5 - 6.5 A Power Supply (
FG423-41
)
PSR4.4 - 4.4 A Power Supply (
FG423-46
)
CC-USB-NI - USB Programming Cable (
FG10-2105
)
CC-NIRC - IR Cables (
FG10-000-11
)
CBL-ETH-FL, Ethernet Cat5e Flat Cable (
FG1-2182-16
)
EXB-IRS4, ICSLan IR/S Interface, 4 IR/S and 4 Inputs (
FG2100-23
)
EXB-COM2, ICSLan Serial Interface, 2 Ports (
FG2100-22
)
EXB-REL8, ICSLan Relay Interface, 8 Channels (
FG2100-20
)
EXB-I/O8, ICSLan Input/Output Interface, 8 Channels (
FG2100-21
)
EXB-MP1, ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1 IR RX (
FG2100-26
)
NX-4200 Specifications (Cont.)
ICSLAN Ports:
4 RJ-45 connectors for ICSLAN interface with support for PoE.
USB Port:
1 Type-A USB port for connecting a mass storage device for loading .tkn files,
reading or writing configuration files and log files, or updating the firmware on the
unit.
ID Pushbutton:
1 black ID pushbutton used during boot to revert to factory configuration or factory
firmware. Also used after boot to toggle IP mode between Static and DHCP.
LAN 10/100 Port:
1 RJ-45 connector provides TCP/IP communication. This is an Auto MDI/MDI-X
enabled port, which allows you to use either straight-through or crossover Ethernet
cables.
The Ethernet Port LEDs show communication activity, connection status, speeds,
and mode information:
• SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and
turns Off when the speed is 10 Mbps.
• L/A (link/activity) - Green LED lights On when the Ethernet cables are connected
and terminated correctly, and blinks when receiving Ethernet data packets.
Power Connection:
2-pin 3.5 mm mini-Phoenix (male) connector with retention screws provides power
to the NX-4200. The NX-4200 can be powered either with a connection to the main
AC power (110/220V
AC
) or from an external 12V
DC
power supply.
General Specifications:
Operating Environment:
• Operating Temperature: 32° F (0° C) to 104° F (40° C)
• Storage Temperature: 14° F (-10° C) to 140° F (60° C)
• Operating Humidity: 5% to 85% RH
• Heat Dissipation (On): 28.7 BTU/hr
Included Accessories:
• 1 2-pin 3.5 mm mini-Phoenix (female) PWR connector
• 2 4-pin 3.5 mm mini-Phoenix (female) AxLink connector
• 2 6-pin 3.5 mm mini-Phoenix (female) I/O connectors
• 2 8-pin 3.5 mm mini-Phoenix (female) Relay connectors
• 2 10-pin 3.5mm mini-Phoenix (female) RS232/422/485 connectors
• 6 5-pin 3.5mm mini-Phoenix (female) RS232 connectors
• 2 CC-NIRC, IR Emitters (
FG10-000-11
)
• 2 removable rack ears