manualshive.com logo in svg

AMX FG2106-01, Hardware Reference Manual, Page: 45 / 48

Share
Download
AMX FG2106-01 Hardware Reference Manual Download Page 45

Installation of the USB Gadget Serial Driver for Windows 8.x – 32/64-Bit Operating Systems

38

Hardware Reference Guide - NX-Series NetLinx Integrated Controllers

Installing the Gadget Serial Driver

The NetLinx Studio v4.0 setup program installs the Gadget Driver into the Windows\INF directory. After completing the 
Disabled Driver Signature Verification procedures, use a Type-A-to-Type-B USB cable to connect your PC to the front 
program port on the NX controller (see FIG. 48). The Windows 8.X Operating System should automatically start 
searching for the driver on the PC.

FIG. 48  

PROGRAM Port

After Windows finds the driver, a Windows Security dialog should open with a "Windows can't verify publisher of this 
driver software" warning.

Choose the 

Install the driver software anyway

 option to finish installing the driver.

When the driver is installed, start NetLinx Studio v4.0. Open the Communications dialog (select 

Settings

 | 

Workspace 

Communication Settings

 | 

Default Settings

) and you should see the NX master controller listed on the USB tab (see 

FIG. 49).

FIG. 49  

Communication Settings dialog - USB tab

Summary of Contents for FG2106-01

















































Reviews:

No comments