![background image](http://html1.mh-extra.com/html/amx/fg2106-01/fg2106-01_hardware-reference-manual_2937839034.webp)
Wiring and Connections
27
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
In the above table, pin 1 is located on the right side of the port, and the pinouts count up to the left.
IR/SERIAL Port: Connections and Wiring
The IR/SERIAL ports provide IR transmit/one-way serial connections that support high-frequency carriers up to 1.142
MHz. You can simultaneously generate up to eight IR/Serial data signals on the NX-4200 and NX-3200, up to four on
the NX-2200, and up to two on the NX-1200.
These ports accept an IR Emitter (CC-NIRC) that mounts onto the device's IR window, or a mini-plug (CC-NSER) that
connects to the device's control jack. You can also connect a data 0 - 5 VDC device to these ports.
NX-3200 and 4200 units each ship with two CC-NIRC IR Emitters (FG10-000-11). NX-1200 and 2200 units ship with
one emitter each.
FIG. 25 displays the IR/SERIAL ports for each NX-series controller.
FIG. 25
IR/SERIAL connector (male)
Note:
The maximum baud rate for ports using DATA mode is 19200. Also, DATA mode works best when using a short
cable length (< 10 feet).
Note:
For each data signal, the negative (-) terminal is for Signal GND, and the positive (+) terminal is for IR/Serial
data.
I/O Port Wiring Specifications
NX-3200/4200
NX-1200/2200
Pin
Signal
Function
Pin
Signal
Function
1
GND
Signal GND
1
GND
Signal GND
2
I/O 1
Input/Output
2
I/O 1
Input/Output
3
I/O 2
Input/Output
3
I/O 2
Input/Output
4
I/O 3
Input/Output
4
I/O 3
Input/Output
5
I/O 4
Input/Output
5
I/O 4
Input/Output
6
12 VDC
PWR
6
12 VDC
PWR
7
GND
Signal GND
8
I/O 5
Input/Output
9
I/O 6
Input/Output
10
I/O 7
Input/Output
11
I/O 8
Input/Output
12
12 VDC
PWR
NX-3200/4200
NX-2200
NX-1200