![background image](http://html1.mh-extra.com/html/amx/fg2106-01/fg2106-01_hardware-reference-manual_2937839039.webp)
Wiring and Connections
32
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
LAN 10/100 Port
All NX-series controllers feature a LAN 10/100 port to provide 10/100 Mbps communication via Category cable. This is
an Auto MDI/MDI-X enabled port, which allows you to use either straight-through or crossover Ethernet cables. The
port support IPv4 and IPv6 networks, as well as HTTP, HTTPS, Telnet, and FTP.
The LAN port automatically negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use half duplex or
full duplex mode.
FIG. 35 displays the LAN port for the NX-series controllers.
FIG. 35
LAN 10/100 port
FIG. 36 provides the pinouts and signals for the LAN connector and cable.
FIG. 36
RJ-45 wiring diagram
FIG. 37 describes the blink activity for the LAN connector and cable.
FIG. 37
LAN connector / LEDs
The LAN port gets its IP address(es) in one or more of the following ways:
IPv4
Static assignment by the user
Dynamic assignment by an IPv4 DHCP server
Link local as a fall back when configured for DHCP but unable to successfully obtain address
IPv6
Link local address
Prefix(es) assigned by a router
A
L
L/A
- Activity LED (green)
lights when receiving or
transmitting LAN
data packets
SPD
- Link LED (amber) lights when
the connection speed is 100 Mbps;
off when 10 Mbps.