11
USER MANUAL - DUX-8C
6. CONTROL OF THE MATRIX
DUX-8C HDMI Matrix is designed with ease of connection and control in mind. When
the Matrix is connected and powered on, you can choose the optimal way to control the
unit at your convenience, either through Front Panel, IR Remote (IR Receiver can be
connected when the Matrix is less accessible), LAN (for Web UI or Telnet) or RS232.
The following chapters will explain the basic instructions of the above control methods.
6.1 Front Panel Control
Basic switch of input sources to output displays can be achieved by using front panel
controls.
Power on the Matrix and wait till the front panel LED shows the model name. Then the
Matrix is ready for operation. Now you can select input source for each output.
To select input source for output display:
1. Press the Left ( ) or Right ( ) button to select output channel. The LED blinks to
show the selected output channel.
Blink Slowly Output Selection
2. Press the Up (
) or Down (
) button to select input channel. If the LED shows
“--”, the output is closed.
Input Selection
3. Press the Enter ( ) button to confirm the selection. When the selection takes effect
the LED stops blinking.
Enter
TIP: Long press the Enter ( )button, the LED will display “V 12”, which is the
module version of the LED screen.