Color Active-Matrix LCD Mini-Touch Panels
Installing Mini-Touch Panels
13
Preparing captive wires
You will need a wire stripper, soldering iron, and flat-blade screwdriver to prepare
and connect the captive wires.
1.
Strip 0.25 inch of wire insulation off all wires and apply a light coat of solder to
the ends using a soldering iron.
2.
Insert each wire into the appropriate opening on the connector according to the
wiring diagrams and connector types described in this section.
3.
Turn the flat-blade screws clockwise to secure the wire in the connector.
Wiring guidelines
Mini-touch panels require regulated 12 VDC power to operate properly. The
AXCESS Control System supplies power via the AXlink cable. The maximum wiring
distance between the control system and mini-touch panel is determined by power
consumption, supplied voltage, and the wire gauge used for the cable. Figure 13 lists
wire sizes and the maximum lengths allowable between the mini-touch panel and
control system. The maximum wiring lengths for using AXlink power are based on a
minimum of 13.5 volts available at the control system’s power supply.
Wiring guidelines
Wire size
Maximum wiring
length
18 AWG
167 feet
20 AWG
106 feet
22 AWG
66 feet
24 AWG
41 feet
If you install the mini-touch panel farther away from the control system than
recommended in Figure 13, connect an external 12 VDC power supply to the
TiltScreen, UniMount, and rack-mount mini-touch panels according to the wiring
diagrams and pinout descriptions in this section.
Caution
Do not connect power to the
mini-touch panel until the wiring
is complete. If you are using a
12 VDC power supply, apply
power to the mini-touch panel
only after installation is
complete.
Caution
Do not over-torque the screw.
Doing so can bend the seating
pin and damage the connector.
Figure 13
Wiring guidelines
Summary of Contents for AXM-MCA
