manualshive.com logo in svg

AMX AXM-MCA, Instruction Manual

Share
Download
AMX AXM-MCA Instruction Manual Download Page 135

Color Active-Matrix LCD Mini-Touch Panels

Replacing the Lithium Batteries

127

11. 

Place the bottom panel on the mini-touch panel and align the screw holes. Insert
the four Phillips-head screws and tighten.

12. 

Plug the AXlink mini-XLR and optional RCA video connector back into the
mini-touch panel.

AXU-MCA (/PB), AXU-MCV (/PB), AXM-MCA (/PB), and AXM-

MCV (/PB)

Remove the lithium batteries from the AXU-MCA (/PB), AXU-MCV (/PB), AXM-
MCA (/PB), and AXM-MCV (/PB):

1. 

Discharge the static electricity from your body by touching a grounded object.

2. 

Insert a flat-blade tool into the release slot on the mini-touch panel’s bezel and
remove the engraved overlay.

3. 

Remove the four #6-32 mounting screws and carefully lean the mini-touch panel
backward to expose the connectors.

4. 

Disconnect the AXlink 4-pin connector, optional RCA video connector, and
remove the touch panel from the BB-MTP Back Box or equipment rack.

5. 

Flip the touch panel facedown onto a soft cloth.  Figure 179 shows the batteries
on the mini-touch panel’s circuit card.

Lithium
batteries

Connector side of circuit card

Figure 179

Battery locations on the mini-

touch panel circuit card

Summary of Contents for AXM-MCA



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands