manualshive.com logo in svg

AMX AXM-MCA, Instruction Manual

Share
Download
AMX AXM-MCA Instruction Manual Download Page 102

94

Mini-Touch Panel Program Reference

Color Active-Matrix LCD Mini-Touch Panels

VERTICAL DISPLAY

     Sets the vertical graph as a vertical indicator for

external devices. Indicator levels are defined in the AXCESS software
program.

VERTICAL ACTIVE

     Sets the vertical graph as a vertical controller for

external devices. Indicator levels are defined in the AXCESS software
program. When a control level is set on the vertical graph, control data is sent
to the control system to control an external device.

VERTICAL CENTER    

Sets the vertical graph as a vertical controller with a

default control level. Levels are defined in the AXCESS software program.
When a control level change is sent to the control system, the external device
changes accordingly until the control data input stops. Then the control level
on the vertical graph returns to the default position and the external device
returns to a default control position.

HORIZONTAL DISPLAY     

Sets the vertical graph as a horizontal status

indicator for external devices. Levels are defined in the AXCESS software
program.

HORIZONTAL ACTIVE     

Sets the horizontal graph as a controller for

external devices. Control levels are defined in the AXCESS software program.
When a control level is set on the horizontal graph, control data is sent to the
control system to control an external device.

HORIZONTAL CENTER  

   Sets the horizontal graph as a horizontal controller

with a default control level. Control levels are defined in the AXCESS
software program. When a control level change is sent to the control system,
the external device changes accordingly until the control data input stops.
Then the control level on the graph returns to the default position and the
external device returns to its default control position.

• 

EXIT

    Closes the Attributes page and returns to the current page.

• 

EXIT NO CHANGE

     Cancels changes, closes the Attributes page, and returns

to the current page.

• 

SET COLORS

     Press to open the SET COLORS page and set the border, fill,

and text colors for channel off and channel on conditions. The OFF and ON
buttons at the bottom of the page show the color settings.

Summary of Contents for AXM-MCA



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands