AMX AXM-MCA, Instruction Manual

Page: 76 / 154

68 Mini-Touch Panel Program Reference Color Active-Matrix LCD Mini-Touch Panels
•
Up arrow Moves the highlight bar up.
•
Down arrow Moves the highlight bar down.
•
ENTER Sets the power up page and returns to the Protected Setup page.
Calibrate
Press the CALIBRATE button to open the decision box ( Figure 97) and reset the
vertical and horizontal touch points on the screen.
YES NO
THIS FUNCTION IS
****FACTORY SET*****
PRESS NO TO EXIT
•
YES Starts the calibration test. Carefully press each crosshair using your
finger or a dull pointer. When the calibration is complete, press the screen to
return to the Protected Setup page. Perform the calibration test when the
touch points and buttons are misaligned.
•
NO Cancels the calibration test.
Page tracking
Press the PAGE TRACKING button to set the page tracking option. When the page
tracking button is enabled, the mini-touch panel sends active page data back to the
AXCESS Control System, 4-pin RS-232 header in the UniMount and rack mount
mini-touch panels, or both depending on which option you select in the Adjust
Serial Settings page. The data can be used to control pages in another mini-touch
panel. Page tracking is on when the button background is black with white text
(Figure 98), and off when the background is white with black text.
PAGE
TRACKING
PAGE
TRACKING
On Off
Note
Select ** NONE ** or
** PREVIOUS ** to set the
mini-touch panel to start up
with the last active page.
Figure 97
Calibrate decision box
Figure 98
PAGE TRACKING buttons