AMX AXM-MCA, Instruction Manual

Page: 121 / 154

Color Active-Matrix LCD Mini-Touch Panels AXCESS Programming 113
AXCESS Programming
Overview
You can program the mini-touch panel to perform a wide variety of operations
using AXCESS Send_Commands. Use the commands described in this section along
with the
AXCESS Programming Guide to program the mini-touch panel.
System Send_Commands
System Send_Commands (Figure 172) are stored in the AXCESS Control System and
direct the mini-touch panel to perform various operations.
System Send_Commands
Command Description
' ABEEP '
Output 1 panel beep even if the Beep value is set to 0 in the
Setup page.
Example:
SEND_COMMAND TP,
'
ABEEP
'
Beeps the panel.
' ADBEEP '
Output 2 panel beeps even if the Double Beep value is set to off
in the Setup page.
Example:
SEND_COMMAND TP, ' ADBEEP '
Double-beeps the panel.
' AKEYB-<text string> '
Open the mini-touch panel keyboard and initialize the text string
entry. The keyboard string is set to null during power up and is
stored until power down.
<text string> = 0-59 characters
Example:
SEND_COMMAND TP,
'
AKEYB-TOUCH HERE
'
Opens the mini-touch panel keyboard with TOUCH HERE in the
display.
Figure 172
System Send_Commands