AMX AXD-CP4/A, Instruction Manual

Page: 33 / 84

Designing Touch Panel Pages
29
4" Color Touch Panels with Audio
3. Enter
1988
(default password) in the keypad and press
ENTER
to open the Protected Setup
page. If you press ENTER after typing an incorrect password, you are immediately returned to
the previous page.
4. Press
EDITOR
to enable the Edit mode. The
EDITOR
button is highlighted in the Protected
Setup page when enabled, as shown in FIG. 27.
5. Press
EXIT
to close the Protected Setup page and return to the Setup page (now in Edit mode).
6. Press
EXIT
again to return to the Main page. The
EDIT
button appears at the top of the page
indicating Edit mode is active.
7. Press
EDIT
to open the Edit bar. The
BUTTON
and
PAGE
options, in the Edit bar (FIG. 28), are
used to design and modify button and page settings.
Setting the Device Base
Press the
DEVICE BASE
option, in the Protected Setup page (FIG. 27), to assign a base (starting)
device address to the touch panel.
1. Enter the base address for the touch panel. The base address range is from 1 - 255. Standard
device addresses begin at 128.
2. Press
ENTER
to save.
FIG. 26 Setup page
FIG. 27 Protected Setup page with the active EDITOR button