Introduction
1
CP-10 Instruction Manual
Introduction
Applicability Notice
The information in this manual applies to the CP-10 Control Panel, which comes with many of the
Modula pre-engineered systems or can be ordered as part of a custom system or as a remote control
panel.
Pre-Engineered Systems
The CP-10 is a component of a number of Modula pre-engineered systems that do not include
audio volume control. All Modula pre-engineered systems are numbered FGP34-xxxx-xxx
(e.g., FGP34-0412-112).
Custom Systems
The CP-10 can be ordered as an option for Modula 3 RU and 4 RU custom systems.
Remote Control Panel
The CP-10 Remote Control Panel (Model # FG1090-216) can be ordered as a separate unit to control
a Modula, a Modula CatPro, an Optima, an Optima SD, or a Precis SD.
Overview
The CP-10 is used for controlling the system’s switches and system attributes. Although control panels
are optional, we recommend one per system for system verification, redundant control, and
troubleshooting.
FIG. 1 illustrates a Modula Distribution Matrix with a CP-10 Control Panel. Other models may vary
slightly in appearance.
Note: AMX AutoPatch software can also be used to control a system; for more information, see the
“AMX AutoPatch CD.” In addition, AMX AutoPatch enclosures can be controlled using BCS (Basic
Control Structure) commands transmitted through an external controller; for more information, see
the “BCS Protocol Instruction Manual” on the CD or at www.amx.com.
CP-10 Control Panels for Custom Systems
Model #
Type of Enclosure Models
FG1034-213 (3 RU)
Modula 32x32 and flex-slot models
FG1034-234 (4 RU)
Modula RGBHV/HD-15 and Modula CatPro models
FIG. 1
CP-10 on a Modula
Power
Indicator
