Programming
24
8.5" Black and White Touch Panels
System Send_Commands (Cont.)
PPON
Opens a specific
popup page.
Syntax:
"’PPON-<page name>’"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"’PPON-Popup Page 1’"
Opens Popup Page 1.
QBEEP
Stops all beeps.
Syntax:
"’QBEEP’"
Example:
SEND_COMMAND TP,"’QBEEP’"
Stops
all
beeps, including "’ABEEP’", "’ADBEEP’", and AXlink beeps.
RESET
Cycles power on
the touch panel.
Syntax:
"RESET"
Example:
RESET
Clears all panel status (same as power up) but doesn’t clear memory.
SETUP
Goes to the Setup
page.
Syntax:
"’SETUP’"
Example:
SEND_COMMAND TP,"’SETUP’"
Flips the touch panel to the Setup page.
SLEEP
Forces the touch
panel to screen
saver mode.
Syntax:
"’SLEEP’"
Example:
SEND_COMMAND TP,"’SLEEP’"
Activates the screen saver mode.
$ST
Sets the power
time-out for
TiltScreen pan-
els.
This is a
WAVE
Send_Command.
The command is followed by 1, 2, or 3 ASCII digits.
Syntax:
"’$ST <number>’"
Variables:
number = 1 - 255 ASCII characters
Example:
SEND_COMMAND TP, "’$ST 31’"
The number entered is based on the minute increments available within the touch panel
such as 30, 60, 120 minutes. This number will be rounded down to match an increment.
TPAGEOFF
Deactivates page
tracking.
Syntax:
"’TPAGEOFF’"
Example:
SEND_COMMAND TP,"’TPAGEOFF’"
Deactivates the page tracking option.