46
①
Click
―
System Tools
‖.
②
Select
―
Restore to Factory
‖.
Parameters specification:
：
This
―
Restore
‖ button is to reset all configurations to the default values. It means the Range
Extender will lose all the settings you have set. So please note down the related settings if
necessary.
Default Password:
admin.
Subnet Mask:
255.255.255.0.
Default IP:
192.168.1.1.
Note
If you enable this option, all current settings will be deleted and be restored to factory default
values. You will have to reconfigure Internet connection settings and wireless settings.
Do not restore factory default settings unless the following happens:
1> You need to join a different network or unfortunately forget the login password.
2> You cannot access Internet and your ISP or our technical support asks you to reset the
device
.
DO NOT interrupt the power to the router when Restore to factory is in process otherwise the
router may be permanently damaged.
Summary of Contents for RE3001
