41
default is 100.
Fragment Threshold:
Every packet fragmentation threshold. Once the data exceed the
threshold, it will be divided into several segments. The value is between 256 and 2346, the
default is 2346.
RTS Threshold:
Request-to-Send Threshold, use the RTS/CTS mechanism, reduce the
possibility of conflict. The value is between1-2347, the default is 2347.
TX Power:
To improve the wireless transmission power, under the condition of long distance
connection can promote wireless performance.
WMM (Wi-Fi Multimedia):
when WMM is enabled, the wireless multimedia data transmission
will be improved greatly.
APSD:
it is used for auto power-saved service. The default is disabled.
3.5.4 Access Control
Wireless access control is actually based on the MAC address to permit or forbid specified
clients to access the wireless network.
Set Steps
：
①
Click
―
WLAN Settings
‖
②
Select
―
Access Control
‖
The Wireless Access Control is based on the MAC address of the wireless adapter to
determine whether it communicates with the
device
or not;
Summary of Contents for RE3001
