AMSAN AM-TC10626LA, Manual

Page: 39 / 43

38
AM-TC10626LA
3
】
Mount tire
⚫
Lubricate tire bead, put the tire on the rim, leave mount/demount head to the edge of the rim,
depress the corresponding pedal to rotate turntable till tire mounted.
⚫
Lift switch upward and the arm goes upward, pull pressing roller C onto tire bead; place
pressing head to the position as Fig.13. Pull switch D downward and let arm goes down, leave
pressing roller under mount/demount head and press tire bead into the middle of the groove, it
will reduce the possibility of abrasion for tire bead. As Fig 13
NOTE
：
Rim cannot be pressed by pressing head and roller during operating, it is very
dangerous
；
⚫
Press pedal Z to turn the turntable together with tire pressing head, mount upper bead with
the help of mounting head. (as Fig.13)
NOTE
：
Stop operation if stuck occurred, to protect the tire, lift pedal Z, the turntable will go
backward. Adjust pressing roller and pressing head, operate as Fig.13 again.
NOTE
：
People except the operator must stay away from the machine during its
operation.
Press upper bead under the ball
protuberance of the mount/demount head
Press upper bead into
the middle of the groove
4
】
Maintenance
Two pressing rollers work as a guide
on the tire bead.
Fig 13