AMSAN AM-TC10626LA, Manual

Page: 11 / 43

10
AM-TC10626LA
Fig.8
Fig.9
Fig.10
3.4. Power and Air Connections
⚫
All work on the electrical system, including minor
operations, must be carried out by professionally qualified
personnel
！
check that the electrical supply voltage is the
same as that indicated on the plate of the machine.
⚫
The power socket should be at a place within the sight of the
operator. The height should be between 24”
～
67”.
⚫
The machine needs grounding protection.
⚫
Air system connection Connect the inflation gun A to the
coupling located to the up of the air filter S
；
put inflating
gun to the hook, on the column (as Fig.8)
；
Connect the
compressed air supply to the coupling located between the
lubricator and the air filter
（
as Fig.8).
NOTE
：
The tire changer is not equipped with overload
protection. Please connect power according to the
electric diagram included in the User’s manual.
Otherwise, the manufacturer will not be responsible for
any accidents.
⚫
Operation test
：
After power is connected, press pedals A
(Fig.9), the turntable will turn clockwise. This test is very
important.
⚫
FRL: Filter, Regulator, Lubricator Assembly(
optional
)
➢
See Fig.10
：
1- Lubricator
；
2- Filter
；
3- Regulator
➢
Adjust pressure: There is a button for regulator 3. When
pulled up, the pressure can be increased or decreased by
turning it clockwise or counter-clockwise (check the 4-
Gauge). After adjusting the operation pressure, press
the button down to lock it.
➢
Filter 2 works to filter the water and impurity in the
compressed air. When water and impurities run beyond
the red line, turn open the ejection valve 5 to release
them.
➢
Lubricator 1 is used to add a certain amount of lubricant
into gas for the moving parts in the cylinder and
regulator. Depress pedal B(as fig.9),3
～
5 times, a
drop of lubricant will drop into the cup in the regulator.
If it doesn’t happen, the adjusting screw 6 can be
adjusted.