AMS 28 Slim Gem, Operation And Service Manual

Page: 41 / 51

L0126J
35
7. If there is no power, check the power outlet at the
wall. If there is power at the outlet check for power
at the plug end of the power cord.
8. If everything is operational return the vendor to its
position next to the wall.
STORING THE VENDOR
If the vendor is to be stored without power for several days or
longer, use the following instructions. These instructions are
similar to those used to store any refrigerator.
1. Unplug the vendor from the power outlet.
2. Remove any products from the vendor.
3. Clean the inside of the vendor using the general
directions given in
CLEANING THE VENDOR
INTERIOR
on page 33.
4. Leave the vendor door open for a day to allow the
interior to thoroughly dry.
5. Close the vendor door and lock it to protect the
interior.
6. Roll up the power cord and place it in the hopper. If
the vendor is being moved follow the handling and
setup procedures given in section
VENDOR
PREPARATION AND INSTALLATION
on page 13.
8 MAINTENANCE