AMPTRON 3IBAT, User Manual

Page: 45 / 62

45
3IBAT User’s Manual
Doze
Monitor blanked when the system enters any power saving mode.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11, NA.
PM Timers
The following four modes are Green PC power saving functions which are
only user configurable when User Defined Power Management has been
selected. See above for available selections.
Standby Mode
When enabled and after the set time of system inactivity, the fixed disk drive
and the video would be shut off while all other devices still operate at full
speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except
the CPU will be shut off.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive
will be powered down while all other devices remain active.
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part of the
time.
You may select the percent of time that the clock runs.
The Choice: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%
VGA Active Monitor
When Enabled, any video activity restarts the global timer for Standby mode.
The Choice: Enabled, Disabled.
Soft-Off by PWR-BTTN
When Enabled, turning the system off with the on/off button places the
system in a very low-power-usage state, with only enough circuitry receiving
power to detect power button activity or Resume by Ring activity.
The Choice: Instant-Off, Delay 4 Sec.