20
3IBAT User’s Manual
1 SENSOR
2 +12V
3 GND
1
2
3
SENSOR
+12V
GND
11.Wake-On-LAN(WOL)connectors(J2)
The Wake-On-LAN connectors connect to a LAN card respectively with a
Wake-On-LAN output. The connectors power up the system when a wakeup
packet or signal is received through the LAN card.
12.CPU/Chassis Fan Connectors(FAN1 and FAN2)
This motherboard provides CPU, Power, and Chassis fan connectors. Ori-
entate the fan so that the heat sink fins allow airflow to go across the onboard
heat sink(s) instead of the expansion slots. Depending on the fan
manufacturer, the wiring and plug may be different. The red wire should be
positive, while the black should be ground. Connect the fan plug to the board
taking into consideration the polarity of the connector.
CPU FAN
AGP FAN
Wake-On-Lan(WOL) connectors
PIN
FUNCTION
Summary of Contents for 3IBAT
Page 8: ...8 3IBAT User s Manual 1 4 Block Diagram...
Page 61: ...61 3IBAT User s Manual...
Page 62: ...62 3IBAT User s Manual...
