AMPTRON 3IBAT, User Manual

Page: 23 / 62

23
3IBAT User’s Manual
19.IR Pin Header:IR1
2-6 Power Connection Procedures
After all connections are made, close the system case cover.
Be sure that all switches are OFF.
Connect the power supply cord to the power supply located on the back
of your system case according to your system user manual.
Connect the power cord to a power outlet that is equipped with a surge
protector.
You may then turn ON your devices in the following order:
(1) Your monitor
(2) External SCSI devices (starting with the last device on the chain)
(3) Your system power For ATX power supplies, you need to switch ON
the power supply if a switch is provided as well as press the ATX
power switch on the front of the case.
The power LED on the front panel of the system case will light. For ATX
power supplies, the power LED will light when the ATX power switch is