14
3IBAT User’s Manual
2-2 System Memory (DIMM)
The motherboard supports up to 768MB 100/133MHz SDRAM. No hard-
ware or BIOS setup is required after adding or removing the system memory.
Note:
1. The motherboard uses only Dual Inline Memory Modules (DIMMs). Sock-
ets are available for 3.3Volt (power level) Synchronous Dynamic Random
Access Memory (SDRAM).
2. The 100/133 MHz compliant SDRAM must be used because of the
strict timing issues involved under this speed.
Installing system Memory
Insert the DIMM module(s) as shown. Because the number of pins are
different on each side of the breaks, the module will be fitted only in the
orientation shown. The DIMM must be 3.3V for this motherboard.
Summary of Contents for 3IBAT
Page 8: ...8 3IBAT User s Manual 1 4 Block Diagram...
Page 61: ...61 3IBAT User s Manual...
Page 62: ...62 3IBAT User s Manual...
