PAGE 7
LS4600 | 6 CHANNEL SPEAKER LINE SURVEILLANCE
1.0 Setup Menu
ENTER
>
ADVANCE SETUP
Use PRE or NEXT keys to select the required channel. Imp value shall be shown, otherwise OPEN or SHORT shall
appear. Press ENTER to proceed to the next setting for the selected channel.
A channel with or without value can be bypassed from surveillance or accepted for monitoring. Select PRE to accept
for monitoring or NEXT to bypass.
The preselected values for high limit and low limits are from 00 ohm to 500 ohm, with incremental of 20 Ohms. We
recommend 50 % higher or lower values to avoid unnecessary false triggering.
Once the required value is selected, press ENTER to proceed to the next sub menu.
1.0 SETUP
o<>
1.0 SETUP
o<> ADVAN SETUP
ENTER
>
1.1 CH.No.#
o<> Imp xxxx
ENTER
>
1.1 CH.No.#
Accept? / Bypass
1.1 CH.No.#
Accept OK
ENTER
>
Accept
1.2 BP ON FAULT
o<> <ON> CH.#
ENTER
>
1.3 H-LIMIT +##
o<> Imp xxxx
1.4 L-LIMIT -##
o<> Imp xxxx
ENTER
>
ENTER
>
1.5 EXIT ?
o<> Y?/N?
To select Bypass
or On upon fault
detection
Bypass
1.1 CH.No.#
Bypass OK
1.1 CH.No.# *
o<> Imp xxxx
>
Channel bypass mark *
>
On selected set High-limit
On selected set Low-limit
