39
network “APOLLO_XXXX” then return to the APOLLO app and continue the setup process. If successful
you should see a list of Wi-Fi networks on the APOLLO app screen that you can connect the camera to
and complete your setup.
d)
If you still do not see the camera’s setup Wi-Fi network, reset the camera to default settings and try
again. To reset the camera, check that the camera is powered on, use a paper clip and press and hold
the Reset button on the back of the camera for 10 seconds. The power light should begin to blink and
the camera will reboot. Once the light becomes solid, go through the setup process on the APOLLO app
again.
The camera cannot connect to my home’s Wi-Fi network.
a)
Check that you are entering the Wi-Fi password correctly and try again.
b)
Your camera may be too far from your router and the Wi-Fi signal may be too weak. We recommend
a network that has a 50% or greater signal strength and is green or yellow. If the signal is red or you do
not see your network, you need to move the camera closer to your Wi-Fi router.
