Ampcontrol ABCM, User Manual

Page: 15 / 26

ABCM CHARGER USER MANUAL
11/03/2020 9:25
Page 15 of 19
Ampcontrol Electronics Pty Ltd
– ABN 35 000 770 141
ABCM Battery Charger User Manual
MAG-212, Rev 5
– March/2020
6.2 Indication LEDs
There are three LEDs on the front fascia of the battery charger controller which provide local diagnostic
information for the user.
6.2.1 Power LED (Green)
LED Status Description
OFF The Controller has no supply
ON Supply healthy
Flashing Distributed power fault
6.2.2 Warning LED (Amber)
LED Status Description
OFF No warning
ON Warning (minor alarm, non-critical alarm)
Flashing Communications
6.2.3 Alarm LED (Red)
LED Status Description
OFF No alarm
ON Alarm (major, critical alarm)
Flashing SW Fault/Boot Loader Mode
6.3 Settings and Calibration
6.3.1 Changing Settings and Calibration
All settings are made in the factory prior to shipping. Most of these settings are made to suit customer
specifications at the time of purchase, however, there are some functions that the user may vary to suit
the applications. This can be facilitated from the Menu Mode on the display, or remotely using the
Ethernet connection.
The system voltage and the rated current of the batteries are
designed into the system and may not be changed.
All calibration of settings is carried out during factory testing of the ABCM Battery Charger
assembly and may not be adjusted once installed.
CAUTION!
The parameters of the ABCM Battery Charger are configured during
manufacture to meet the agreed customer specifications. It is
recommended that Ampcontrol be contacted prior to implementing
any changes to these settings.