Ampcontrol ABCM, User Manual

Page: 8 / 26

ABCM CHARGER USER MANUAL
11/03/2020 9:25
Page 8 of 19
Ampcontrol Electronics Pty Ltd
– ABN 35 000 770 141
ABCM Battery Charger User Manual
MAG-212, Rev 5
– March/2020
2.5 Storage and Care of Batteries
The batteries are delivered filled, charged and ready for connection. It is recommended that the storage
period of the batteries be as short as possible. The temperature of the environment in which the batteries
are stored has an impact on the discharge rate of the units and hence it is important to store the
batteries in a fully charged condition in a cool, dry environment.
The batteries will come already installed in the battery cabinet for smaller assemblies but could be
shipped separately for larger units. If batteries are received already installed, ensure that the positive
cable remains in the same way at it is shipped, that is, disconnected and insulated.
CAUTION!
Open circuit batteries lose part of their capacity due to self-discharge
(2% per month at 20°C). A float recharge at least every six months
(applying a voltage of 2.27V/cell for approximately 48 hours) is
recommended to maintain battery life.