ABCM CHARGER USER MANUAL
11/03/2020 9:25
Page 6 of 19
Ampcontrol Electronics Pty Ltd
– ABN 35 000 770 141
ABCM Battery Charger User Manual
MAG-212, Rev 5
– March/2020
When the cabinet is correctly positioned, such that the incoming and outgoing cables are not impeded in
any way and adequate personnel and maintenance clearance is available around the cabinet (including
any statutory allowance for when the doors are open) the cabinet must be bolted to the ground.
Electrical Installation -
After the termination of incoming cables (including earth) and the outgoing
cables to the appropriate terminals, check all cable connections for tightness including the
interconnection of the cables between printed circuit boards.
During shipment the positive terminal(s) of the included batteries
have been insulated and disconnected from the battery terminal(s) for
safety reasons
– reconnect these terminals with care.
The batteries are delivered filled, charged and ready for connection. No operation such as filling,
commissioning or other type is required. They need only be connected as required by the particular
application. If the batteries were delivered separately from the cabinet install them in the cabinet starting
from the lowest level first to ensure stability.
1.1.5 Operation
The ABCM Battery Charger is intended to be used as part of the overall power system operating in the
mining environment. It provides back-up power to control systems to increase system reliability and
safety.
The battery charger system is not intended to be the sole method of providing control system power to
the mining environment. Other methods should be employed to ensure the highest level of system
integrity and reliability.
As safety depends on the ABCM Battery Charger functioning correctly, it is highly recommended that all
safety functions of the charger be periodically tested to ensure correct operation.
Summary of Contents for ABCM
Page 20: ...A APPENDIX A DRAWINGS ...
Page 21: ...11 03 2020 9 25 ...
Page 22: ...11 03 2020 9 25 ...
Page 23: ...B APPENDIX B CHARGER CONNECTION INSTRUCTIONS ...