AMPW 400-1000L I&O Manual
15
. Pre-Installation and Mounting
(continued)
D. AMP 400-1000L Stacking
1. The AMP 400-1000L models may be installed in a
stacked configuation.
a. One 400 or 500 model can be mounted on the top
of another 400 or 500 model.
b. One 650, 800, or 1000L model can be mounted
on the top of another 650, 800, or 1000L model.
2. The stacking bracket kit (PN: 111405-01) is sold
separately. The kit includes 4 brackets and 16 self
drilling screws.
a. Follow all previous instructions for mounting the
bottom appliance.
b. Use the included screws to secure the brackets as
shown in
Figure 5: AMP 400-1000L Stacking Brackets and Dislplay Rotation
3. Outdoor AMP models cannot be stacked.
4. The display bracket on the top appliance can be
rotated for a better viewing angle of the Concert
display.
a. Remove the front panel and disconnect the wire
harnesses going to the display and the On/Off
switch.
b. Remove the 4 nuts holding the display bracket.
c. Unscrews the clamps holding the display onto the
display bracket to rotate the display 180°.
d. Reinstall the display, reinstall the display bracket
(Concert logo right side up), and connect the wire
harnesses.
Rear Right
Front Right
C
D
Front Left
Rear Left
Rotated Display
